Lighting_M2M_Janus

UMTS Terminus Plug-In UMTS864CF

The Terminus UMTS864CF is the UMTS communication terminal of the Plug-In series. This terminal provides IoT communication over UMTS networks.

 

 

 

UMTS864CF Features

  • HSDPA 7.2 Mbps
  • Tri-band UMTS/HSDPA (WCDMA/FDD) 850/1900/2100 MHz
  • Quad-band EGSM 850/900/1800/1900 MHz
  • GPRS/EDGE Class 12
  • TCP/IP stack access via AT commands
  • Over-the-Air firmware management
  • Voice and SMS (MO/MT)
  • Output power
    • Class 4 (2W, 33 dBm) @ GSM 850/900
    • Class 1 (1W, 30 dBm) @ GSM 1800/1900
    • Class 3 (0.25W, 24 dBm) @ UMTS
    • Class E2 (0.5W, 27 dBm) @ EDGE 850/900
    • Class E2 (0.4W, 26 dBm) @ EDGE 1800/1900
  • Dimensions: 2.5" x 1.4" x 0.420"
  • Operational temperature range: -30° to 80°C
  • Internal LDO regulator
    • Input voltage range: 4.75 to 5.25 Vdc (5.0 Vdc nominal)
    • Supply disable via terminal input pin
  • SIM Card
    • Standard locking SIM card socket
    • Optional SIM on a chip
  • UMTS and GPS available via Murata GSC miniature RF connector
  • GPS
    • Stand alone GPS available at AT command interface
    • NMEA data
    • Dedicated GPS antenna connection with active antenna support

Documentation

Technical Documents

Application Notes

Telit Documentation

Telit Firmware
v08.01.127

AT Commands Reference Guide (Issue #7)

Technical Support

New Janus Forum!

View FAQ's or ask questions over the UMTS864CF on our Janus Forum - Click here

Not sure which Terminus is right for your application? Check out the Terminus product comparison. View Terminus Comparison

Technical Support